JBL Tune 125TWS Earbuds: A Comprehensive User Manual for First-Time Users
Welcome to the world of JBL audio excellence with your new JBL Tune 125TWS True Wireless Earbuds. Designed for seamless connectivity, superior sound quality, and extended battery life, these earbuds are your perfect companion for music, calls, and more. This guide provides a step-by-step walkthrough to help you set up, use, and maintain your earbuds effectively. Jbl tune 125tws earbuds manual
???? What's in the Box
Upon unboxing your JBL Tune 125TWS earbuds, ensure you have the following items:
JBL Tune 125TWS Earbuds: The main audio devices.
Charging Case: For storing and charging the earbuds.
USB Type-C Charging Cable: For charging the case.
3 Sizes of Eartips (S, M, L): To ensure a comfortable and secure fit.
Quick Start Guide: Provides basic instructions to get you started.
Warranty and Safety Information: Important product information.
???? Initial Setup and Pairing
Step 1: Charging the Earbuds and Case
Before first use, it's essential to charge both the earbuds and the charging case:
Charge the Charging Case: Connect the USB Type-C cable to the charging case and plug it into a power source. The case will take approximately 2 hours to charge fully.
Charge the Earbuds: Place the earbuds into the charging case. The earbuds will automatically charge when placed correctly.
Step 2: Powering On and Pairing
To pair your earbuds with your device:
Open the Charging Case: Remove the earbuds from the case. They will power on automatically.
Enter Pairing Mode: If the earbuds don't automatically enter pairing mode, press and hold the multifunction button on each earbud for about 5 seconds until the LED indicators flash white and blue.
Connect to Your Device:
Android Devices: Enable Bluetooth and select "JBL Tune 125TWS" from the list of available devices.
iOS Devices: Enable Bluetooth and select "JBL Tune 125TWS" from the list of available devices.
Windows PCs: Go to Bluetooth settings, select "Add device," choose Bluetooth, and then select "JBL Tune 125TWS."
After successful pairing, the LED indicators will turn solid blue, and you'll hear a confirmation sound.SoundGuys
Step 3: Using Mono Mode
The JBL Tune 125TWS supports mono mode, allowing you to use either the left or right earbud independently:
Mono Mode: Simply remove one earbud from the charging case. It will automatically connect to your device.
Stereo Mode: Remove both earbuds from the charging case for stereo sound.
???? Controls and Features
Touch Controls
Each earbud is equipped with a multifunction touch sensor:
Play/Pause Music: Tap once on either earbud.
Answer/End Calls: Tap once on either earbud.
Reject Incoming Call: Press and hold for 2 seconds on either earbud.
Activate Voice Assistant: Press and hold for 2 seconds on either earbud.
LED Indicators
The LED indicators provide status updates:
Flashing White and Blue: Pairing mode.
Solid Blue: Successfully connected.
Flashing Red: Low battery.
Solid Red: Charging.JBL StoreManualsLib
???? Charging and Battery Life
Charging the Earbuds
Place Earbuds in Charging Case: Ensure the earbuds are correctly seated in the charging case. The LED indicators will light up to show charging status.
Charging Time: Approximately 2 hours from empty.
Battery Life: Up to 8 hours of continuous playback on a full charge.
Charging the Charging Case
Connect to Power Source: Use the included USB Type-C cable to connect the charging case to a power source.
Charging Time: Approximately 2 hours from empty.
Battery Life: The case provides an additional 24 hours of battery life, allowing you to extend your listening time throughout the day.
???? Maintenance and Care
Cleaning the Earbuds
Ear Tips: Remove the ear tips and clean them with a soft, dry cloth. Avoid using water or cleaning agents.
Earbud Surface: Wipe the earbuds with a dry cloth to remove dirt and debris.
Cleaning the Charging Case
Interior: Use a dry cloth to wipe the inside of the charging case, removing dust and debris.
Charging Ports: Ensure that the charging ports remain clean and free of obstructions.Tech Archived
Storage
When Not in Use: Store the earbuds in their charging case to protect them from damage and to keep them charged.
Avoid Extreme Conditions: Do not expose the earbuds to extreme temperatures or moisture.
???? Troubleshooting
Earbuds Not Turning On
Ensure Proper Charging: Check that the earbuds are correctly seated in the charging case and that the case is charged.
Reset Earbuds: Place both earbuds in the charging case, close the lid, wait for 5 seconds, then open the lid and remove the earbuds. They should power on automatically.
Connectivity Issues
Re-pairing: Go to your device's Bluetooth settings, remove "JBL Tune 125TWS" from the list of paired devices, and then follow the pairing steps again.
Factory Reset: Press and hold the multifunction button on both earbuds for about 10 seconds until the LED indicators flash red. This